Lego Star Wars Skywalker Saga: How To Complete All Challenges In Droid Factory Frenzy

Lego Star Wars Skywalker Saga Droid Factory Frenzy Challenges are the most difficult in Episode II Attack Of The Clones of the video game developed by  TT Games because all of them can be easily missed if not completed in specific sections.

The good news, though, is that if you follow our Droid Factory Frenzy Level Challenges guide below, you can get them in a single playthrough and in Story Mode without having to restart and replay the mission.

Our guide aims to help you unlock the extra Kyber Brick offered as a reward for finishing the 3 Challenges or side objectives if you want.

Therefore, let’s start with the list of Level Challenges in Droid Factory Frenzy, which includes:

  • No Hanging Around
  • Mind Control Drone
  • Zipping Past Danger

How To Complete Lego Star Wars: The Skywalker Saga Droid Factory Frenzy Level Challenge #1 – Zipping Past Danger

Lego Star Wars Zipping Past Danger Level Challenge is the most difficult one because to complete it, you’ll have to find a shortcut over a conveyor belt.

When you start Droid Factory Frenzy, you’ll notice that you have four characters and two teams at your disposal.

In the first area, you’ll control Padme and Anakin on one side of the factory, then R2-D2 and C-3PO will join them.

Your first goal is to unlock the gate in the area where Padme and Anakin can be spotted. After you solve the small puzzle and recharge the battery, drop to the next section with Padme and Anakin, and you’ll get to some pressure plates you have to avoid.

Head left here, but when you see the last pressure plate (pictured below), do not progress further, and do not jump to the area below.

Lego Star Wars Skywalker Saga Droid Factory Frenzy Challenges Guide

Instead, switch to Padme and wait for the last pressure plate to hit the ground and jump on it.

While standing on top of the plate, use Padme’s grapple ability to reach the blue lights above. Continue to ascend, and you’ll find a zipline you can use to progress further into the level.

Make sure you do not miss this Challenge, as you won’t be able to return here unless you restart the whole mission.

How To Complete Droid Factory Frenzy Challenge #2 – Mind Control Drone

For the Lego Star Wars Mind Control Drone Challenge, you need to turn Geonosians against each other with Jedi Mind Tricks.

This challenge is unlocked while playing as Anakin in the section where you’ll have to defeat a small army of Geonosians and three droids (pictured below).

Lego Star Wars Skywalker Saga Droid Factory Frenzy Level Challenges Guide

Switch to Anakin when you get to this section, then stay close to one of the Geonosians and hold B on Xbox.

From the list of Jedi Mind Tricks, select Influence, then while controlling the Geonosian, attack another one once.

Wait for the Geonosian you attacked to hit you back if needed, then the Challenge is complete, and you can clear the area.

How To Complete Droid Factory Frenzy Challenge #3 – No Hanging Around

Last but not least, to obtain the Kyber Brick, you have to complete the No Hanging Around Challenge by finding a way to rescue Padme within 30 seconds.

While this may sound a bit difficult, it is pretty easy to complete when you get to the last area in this level.

Eventually, Padme falls into one of the large iron-melting recipients, and you have 30 seconds to save her. When this event occurs, immediately switch to R2-D2 and follow the conveyor belt ahead, ignoring all droids.

At the end of the conveyor belt, use the grappling point (pictured below) to get to the platform in the distance.

Lego Star Wars Skywalker Saga Droid Factory Frenzy Challenges Locations Guide

Here you’ll find a terminal with a small rotating puzzle you have to solve. It’s pretty accessible, and by solving it, you’ll rescue Padme.

These are the three Droid Factory Frenzy Challenges you have to complete in Lego Star Wars Skywalker Saga before moving to the next mission named Petranaki Panic.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *